Tap Repair Cost (2026 UK Guide)

Tap repair costs in the UK typically range from £80 to £250+, depending on the type of tap, the cause of the fault, and whether replacement parts are required. Dripping taps and loose fittings are usually quick and inexpensive to fix, while mixer tap or cartridge issues can cost more.

This guide explains average tap repair costs in 2026, common tap problems, and when professional plumbing repairs are recommended.


Average Tap Repair Cost

Tap IssueTypical Repair RequiredAverage Cost
Dripping tapWasher replacement£80–£120
Loose tapTightening or resealing£80–£150
Mixer tap faultCartridge replacement£120–£220
Low water flow from tapValve or filter repair£100–£200
Leaking tap baseResealing or refitting£120–£250
Emergency tap repairUrgent call-out£150–£300+

Costs may be higher for designer taps, concealed fittings, or emergency call-outs.

For a full overview of plumbing prices, see our plumbing repair cost guide.


Common Tap Problems Explained

🚰 Dripping Tap

Usually caused by a worn washer or faulty cartridge. This is one of the most common and cheapest plumbing repairs.

🚰 Leaking Tap Base

Water leaking around the base of the tap often indicates worn seals or loose fittings.

🚰 Mixer Tap Issues

Mixer taps use cartridges rather than washers, which are more expensive to replace.

🚰 Low Water Flow

Often caused by limescale build-up or a partially blocked valve or aerator.


What Affects Tap Repair Costs?

Type of Tap

Standard pillar taps are cheaper to repair than mixer or designer taps.

Replacement Parts

Cartridges and specialist components increase material costs.

Accessibility

Taps in tight spaces or under sinks may take longer to access.

Emergency Repairs

Out-of-hours call-outs increase total cost.


Tap Repair vs Tap Replacement

Repair Is Usually Enough When:

  • The tap body is in good condition
  • Faults are limited to washers or cartridges
  • Leaks are minor

Replacement May Be Better When:

  • The tap is heavily corroded
  • Repairs are frequent
  • Parts are no longer available

Replacing a tap can sometimes be more cost-effective long-term.


Tap Leaks and Water Damage

Although tap leaks are usually minor, long-term dripping or base leaks can damage cabinets, floors, and worktops.

You may also need to review:


When Is a Tap Repair an Emergency?

Tap repairs are rarely emergencies, but urgent repairs may be needed if:

  • Water cannot be isolated
  • Leaks are causing flooding
  • The tap supplies the only water source

In these cases, an emergency plumber may be required.

For emergency pricing, see our emergency plumber call-out cost guide.


Can You Repair a Tap Yourself?

DIY Repairs (Suitable for Some)

  • Replacing washers
  • Cleaning aerators
  • Tightening loose fittings

Professional Repairs Recommended For:

  • Mixer tap cartridge replacement
  • Persistent leaks
  • Concealed or designer taps

Incorrect DIY repairs can cause further leaks.


How Long Does Tap Repair Take?

  • Simple washer replacement: 30–45 minutes
  • Cartridge replacement: 1–2 hours
  • Resealing or refitting: 1–2 hours

Does Home Insurance Cover Tap Repairs?

Insurance may cover damage caused by sudden leaks, but tap repairs due to wear and tear are usually excluded.


How to Reduce Tap Repair Costs

  • Address dripping taps early
  • Avoid overtightening handles
  • Clean limescale regularly
  • Replace worn components promptly

Preventative maintenance keeps costs low.


Final Thoughts

Tap repair costs are usually inexpensive when addressed early. Prompt repairs prevent water waste, damage, and the need for emergency plumbing services.

Similar Posts

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *